UnicornGraveyard

cover

IMG_4355.PNG

IMG_4361.PNG

IMG_4360.PNG

plate_1.png

629e1c3b0de27308.png

0.16mm layer, 3 walls, 5% infill

Stephi Makes 3D

IMG_6213.JPG

0.16mm layer Height preferred  Make sure &#34;Initial layer height&#34; is the same as Layer height, ex. 0.2mm,0.2mm Print in Place, no supports 3 walls min.  Arachne Wall Generator works best.

0.16mm layer, 3 walls, 8% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like this rearing stallion, hit it with a Boost 🐴🔥 Boosts help my models get seen and keep the drops coming. Appreciate you.</boostcontent></boostme>A dramatic Clydesdale rearing horse posed like a mythic war-steed, planted on a scenic rocky base. This one’s all about silhouette and anatomy — big chest, tense forelegs, and flowing mane/tail that reads great in a single color (bone/marble) and looks even nastier with paint or a light wash + drybrush.If you want a centerpiece print that actually looks like you tried… this is it.&nbsp;<h2>Printing Notes (FDM)</h2>This is a tall, forward-leaning pose — don’t fight physics. Print it like you want it to succeed.Recommended settings<ul><li>Nozzle: 0.4mm</li><li>Layer height: 0.16 adaptive (turning off adaptive reduces quality but decreases print time)</li><li>Walls: 3</li><li>Infill: 5% (Gyroid )</li><li> </li></ul>Supports (likely required)<ul><li>Use Tree/Organic supports</li><li>Target support under:<ul><li>Front legs / hooves</li><li>Chin / lower jaw (depending on angle)</li><li>Any small undercuts around the mane / chest</li></ul>&nbsp;</li></ul>Stability tip<ul><li>If your printer is prone to wobble on tall prints, slow it down a bit and use a brim. A rearing pose can turn into a failure late in the print if the whole thing starts vibrating.</li></ul>&nbsp;<h2>Finishing (optional but looks insane)</h2><ul><li>Single-color “statue mode”: bone/ivory filament + matte clear coat</li><li>Quick “cheat code” paint job:<ul><li>Clear coat first then<ul><li>Black/brown wash into recesses</li><li>Light drybrush on edges (mane + muscles pop immediately)</li></ul></li></ul></li></ul>&nbsp;<h2>Sharing / Licensing</h2>Personal printing is always cool. If you want to sell physical prints, check my commercial license options on my profile/Patreon.&nbsp;

Horse of the Year

ASIA

Print Profile(2)

Description

Printing Notes (FDM)

Finishing (optional but looks insane)

Sharing / Licensing

Comment & Rating (11)

License

Related Models