SteelSeries Nova Pro DAC +Headset under desk Mount

A modern under desk mount for the SteelSeries Nova Pro DAC and headset.

Designed for clean setups and daily practicality
Right side access so you can swap the currently charging battery quickly
Left side slot to park a fully charged battery so it’s always within reach
No supports needed
Simple, sturdy assembly with only two screws

Hardware

2x Countersunk Flat Head Screw M3 × 20 mm

Printing notes

Support material: none
Orientation: print flat as is in the print profile

Assembly tutorial (Check the Images of the Porject)

1. Align the under desk mount with the desk edge. Secure it using 2x M3 × 20 countersunk flat head screws.
2. Slide the headset hanger into the DAC housing from the back. Keep sliding until the holes line up.
3. Insert the locking pin into the aligned hole on the DAC housing. This locks both parts together.
4. Insert the DAC into the DAC housing until it sits flush at the front.
5. Slide the assembled DAC housing into the under desk mount from back to front. Push until it sits flush at the front.
6. Slide the mount lock into the groove on the under desk mount. Push it in fully to lock the assembly in place.

Congratulations, you are done!