Sculptural relief lion head medallion
Print Profile(1)
Description
Boost Me (for free)
If you want to support my projects I would be grateful.
The work features an artistic design of alion's head in relief or bas-relief style. This type of design, characterized by an intricate mane and scroll decorations (Baroque or Greek style), is often chosen to symbolize strength, courage, and leadership.
The piece is designed for modern decoration and has a hook at the top.
I used PLA Basic Bambulab in black and beige (colors can be changed in the slicer).
The print is simple and only consumes just over 14 grams of filament in total.
I included supports, and since it involves circular patterns, I also added rafts. In fact, to achieve a clean print with the maximum possible detail, I prepared it to be printed vertically.
The supports detach with extreme ease, you'll see
If you want maximum detail, perhaps use a 0.16 preset instead of 0.20 (printing times will obviously increase)
A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. It is these small precautions, along with many others, that determine the success of a good print.
Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; let's find solutions together in a perfectly collaborative atmosphere. I have made several prints of this object and all have turned out perfect, as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, or wet or poor quality filaments, do not blame me.
PRINTING INSTRUCTIONS:
- Layer height 0.2 mm
- Initial layer height 0.2 mm
- Wall loops 2
- Top shell layers 5
- Bottom shell layers 3
- Infill 12%
- Grid pattern
- Supports;
- Raft (raft layers 5 - raft z distance 0.15 mm)
- Outer wall speed 200 mm/s
- Inner wall speed 300 mm/s
- Normal print acceleration speed 8000 mm/s
- Outer wall acceleration speed 8000 mm/s
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)