PDMOVIE Focus Controller Extension

I recently acquired the LIVE AIR 3 SMART Lidar Autofocus System manufactured by PDMOVIE. Along with it, I received a Focus Controller that can be conveniently attached by screwing it onto accessories such as the SmallRig NATO Handle or similar items.

While the Controller functions flawlessly without any additional accessories, I found myself desiring a larger wheel for easier manipulation. Consequently, I promptly designed a few options to address this preference.

| IMPORTANT & DISCLAIMER ||||||||||

• I do not take any responsibility for damaging your gear, use caution!!
• The Wheels have a good fit and do not require further fastening, at least with regular PLA (tested with Bambu PLA Basic).
• If you print with PLA-CF like I did, you may need to sand the wheels just a tiny bit (tested with Bambu PLA CF).
• Did not test it with other Filament
• Was printed on a Bambu Lab XC1

| PRINT SETTINGS ||||||||||

• Walls: 3
• Infill: 10
• Infill Pattern: Gyroid
• No Brim
• Orientation: Flat

If you like this Design, share some Love 🧡 & leave a Like 👍