Panda Den Poop Chute for P1S, P2S, and X1C - Free 3D Print Model

Search models, users, collections, and posts

MrDulkes

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

H2S

H2D Pro

X1E

X1 Carbon

P2S

P1P

H2C

H2D

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

2.9 h

1 plate

4.9(7)

Open in Bambu Studio

Boost

132

133

Released

Description

This is a complete redesign of the Panda Den Poop Chute from BQ. This Poop Chute was created from scratch. While it is technically not a remix, the original from BQ was used as inspiration. I tried to keep the design as close as possible to this original, while solving all the issues the original has (primary issue: it sinks in the poop hole with just normal use).

Changes:

The base is made wider, so it fits over the hole instead of sinking into it, like the original.
The chute was made a few mm thicker to cover the back of the hole.
The “feet” that hold the screws were re-shaped so that they now print without supports.
The screw holes were widened, and a chamfer was added, so that you can now actually screw in the magnets with the screws that came with the Panda Den.
The top was reshaped as to not obstruct a spool on the back of the printer (P1S).

This object still needs supports turned on.

Note that my print in the photos is from a slightly earlier version that I made a few modifications to. I will print the current design as soon as I can, and replace the photos at that time.

Boost Me (for free)

If you appreciate this design, please boost it. Boosts help me to keep my designs free for everyone.

Alternately, please consider putting a few bucks in my tip jar.

Boosts and tips are never expected, but always appreciated.

Comment & Rating (16)

@farouk700000

Hello and thank you for the file, it doesn't work for me (X1C), either the cable or the x4 ams hub is in the way

The designer has replied

Show original

@MrDulkes

Does the original from BQ work for you?

@farouk700000

Replying to @MrDulkes :

My apologies, it actually works, thank you very much

Show original

@MrDulkes

Replying to @farouk700000 :

Great. Thanks for updating!

@5kyrunn3r

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

better than the original. thank you for this revised version.

The profile uploader has replied

@MrDulkes

I’m glad you found it useful.

(Edited)

@NetworkChris

Hello, excuse the question, but how do I attach the slide to my P1S?

The designer has replied

@MrDulkes

Your Panda Den came with screws and magnets. You put the screw through the magnet and in one of the holes. After every hole has a magnet. The poop chute will attach to the back of the P1S.

@540i_Twan

is this compatible with exhaust fan ?

The designer has replied

@MrDulkes

Yes. This has the exact same profile as the original one from BQ, until you get to the bottom.

@Eticket1337

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1835399956

Print Profile

0.2mm layer, 2 walls, 15% infill

@pjrml

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@peterg_CA

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_880764259

Print Profile

0.2mm layer, 2 walls, 15% infill

@Alahsnackbar

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.