Flaming Tiger Hueforge

Project: 2.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 333.33x500mm in size

You may print at higher layer heights below the Base Thickness of 0.72mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 1.76mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #fb0a09 PLA Creality Hyper Red  Transmission Distance: 3.7
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #8 (0.8mm) swap to Creality Hyper Red
    At layer #12 (1.12mm) swap to BambuLab Basic Pumpkin Orange
    At layer #15 (1.36mm) swap to PolyLite White for the rest.