Goku Powering Up Hueforge Print - Free 3D Print Model

Search models, users, collections, and posts

CC3D

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.04mm layer, 2 walls, 100% infill

Designer

3.6 h

1 plate

4.6(5)

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

*You dont need a .2 nozzle, i printed this with a .4 nozzle with the layer height at .04

Filaments Used:
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 5
PLA BambuLab Tough Black Transmission Distance: 0.6
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Red
At layer #11 (0.56mm) swap to Yellow
At layer #28 (1.24mm) swap to Black
At layer #33 (1.44mm) swap to Ivory White for the rest.

I also made a frame if you wanted to use that as well. If you put it up to the light without a frame it also shines through.

Boost Me (for free)

Comment & Rating (9)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.