Scx30 Trailer with Ramps
Print Profile(1)
Description
Hi, this is my first project I have made so it may be a little rough. Printed in PLA, 40% infill, lowered bed temp to 50 degrees to help with warping. I used m2x40mm hex screws for ramps and m2x25mm or m2x30mm for the axles. You can also just cut down the m2x40mm screws down a little so you only have to buy one set of screws. I am using injora wheels and tires but the stock wheels off the jeep or bronco and even the factory K10 wheels and tires will work. Hope you enjoy, feel free to boost me! Thanks
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (28)