Tac Sac 20mm Picatinny forgrip - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

user_255137166

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(2)

All

A1 mini

H2S

P2S

X1E

P1P

H2C

X1 Carbon

H2D Pro

P1S

H2D

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.6(11)

TPU/PETG Smooth Sack

3 h

1 plate

Open in Bambu Studio

Boost

171

236

205

Released

Bill of Materials

Bambu Filaments

Select all

Arctic Whisper (10900) / Filament with spool / 1kg

PLA Basic Gradient

List other parts

M4 Bolt x 1:
M4 nut x 1:

Description

I tried my best to remove any non-manifold edges and tidy it up a bit.

also I did a bit of work and discovered that the diameter of the screw hole is an M4 screw, I would recommend using a 20mm length screw and a corresponding nut.

i used this:

https://www.halfords.com/motoring/tools/fuses-electricals-and-fixings/fixings/halfords-set-screws-and-nuts-m4-x-20mm-fixg136-726374.html?cm_mmc=Google+PLA-_-Motoring%3ETools%3EFuses,+Electricals+and+Fixings%3EFixings-_-Motoring%3ETools%3EFuses,+Electricals+&+Fixings%3EFixings-_-726374=&srsltid=AfmBOoouYKXoyBkG5tVXkEXwYMluLbyNPMq1kKtpRZ7dLTw4bxpFGaSsYy8