CREDIT CARD WALLET (BLANK)
Print Profile(1)
Description
Completely 3D printable bank card wallet for 5 credit cards and ejection feature. Nice modern look and stylish as well. Created and designed in Fusion 360.
Update(Feb 2026): new improved design published since some of you had problems with printing the side latches and fitting the cards
now latches combined with bottom frame into one printable piece (makes assembling much easier)
Filament: Extrudr Pla black & yellow
Resolution: 0.15mm for all parts
Printing time: ~3-4 hrs
Both frame parts must be glued together
Important information: Your printer has to be dialed in correctly for the tight tolerances to work!
Otherwise it could be, that the cards are stuck too tight and cant be ejected easily or the other way around: the cards fall out too easily
3D PRINTING SETTINGS
Both of the Wallet's Frame can each be printed with flat side faced the bed. No supports needed there.
ejector should be placed on the side (90°), so that the axis of the pins is parallel to the build platform. this ensures the maximum strength and prevents the pins from breaking of when the mechanism is used. Support is needed everywhere.
Infill:
Frame: 30-50%
Ejector: 100% or high number of walls
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (61)