Space Marine Wallart

Willkommen bei Frank druckt 3D

Welcome to Frank druckt 3D

Frank 3D Printsへようこそ

欢迎来到 Frank prints 3D

Im a hobbyist with ambitions. You can find me here and on other Platforms. My main Platform is TikTok. The time for my Website is rare so please do not expect too much updates. On TikTok you should find daily videos about 3d printing and my Journey! Please consider following me and keep asking questions, i will try to help everybody as long as i am able too!

About this model

A good friend asked me to create a 3D model that could be hung on the wall. I did that, but many new ideas on the subject came to me, which I also implemented. This is one of the many different models I have developed and realized

The necessary supports are quite low, and the model is easy to print. For my test, I chose a silver PLA Silk filament, as I thought it would fit best. You can, of course, create color variations as you wish

I deliberately chose the scaling so that the model remains printable even with an A1 mini. Of course, it also works at a significantly higher scale. However, since scaling up would also enlarge the cutout for the screw, I left this cutout as a separate negative model and did not integrate it into the main model. So you can scale the cutout separately to the desired size. Here's a quick tutorial on how to do that:

Correctly scaling the hanger

If you want to scale the model itself larger, please note that the cutout for hanging will also scale. This may become too large or too small, depending on how you change the scaling. Here are instructions on how to get the cutout to the desired size

Step 1:

Measure how large the cutout for the desired screw needs to be. Use a caliper, a folding rule, or a ruler here! Note down the determined value

Step 2:

Select object “Wandaufhängung Loch.stl” in the object overview! and display the model from below in the slicer

Step 3:

Set the outer width to the outer width of your screw +0.2-0.4 mm, so that you have a certain tolerance and do not damage the model when hanging it

In this example image, we would need to set the value for “X” to approximately 8mm

Step 4:

Position the hanger where you want it! Don't forget to move the hanger along the Z-axis so that only a small piece sticks out from the bottom of the model. Please make sure that the model for cutting is correctly positioned so that it does not print incorrectly! The lower, smaller part of the cutting model must protrude from the main model, while the upper, thicker part must disappear within the model

Note

For more 3D Printing Tips and videos on the topic, feel free to follow me:

TikTok: https://www.tiktok.com/@Frankdruckt3d

Instagram: https://www.instagram.com/frankdruckt3d/

This model was fundamentally created with AI assistance and further refined and processed in Nomad Sculpt. It is not a pure AI model; the AI was only used supportively, but it still represents several hours of work! I would be happy if you continue to support my work and follow me! I plan to create a complete wall art series, so it's worth following my account here! All news will be shared first on Instagram, and videos about content and more on TikTok

If you like my work there are a lot of way how to support me! 

The easiest and most direct way is to leave a boost…

You can also support me with a membership! They start at the lowest tier possible here on makerworld. For just 3 bucks a month you can force me to continue uploading more and new models ;-) I wouldn´t be able to leave a month without new models when there are people who support me with their hard earned money… LoL therefore im to well educated ;-)

Also you can use my Amazon links in the descriptions, when i tell which Filament i use! Links like this here:

Buy PLA Filaments on Amazon

But the most convenient way to support me, without paying anything is to follow me on TikTok, leave some likes, share some videos and spread the message that im there! 

If you are a designer, you can also contact me to show your models, if you are a shop or manufacturer feel also free to reach out! Im here to show people the beauty of 3D printing and sharing my journey in this hobby. Showing off what others can do is also part of the game! Support ist kein Mord! (support is no murder, we say in germany)