Rearview Camera Housing Trunk
Print Profile(1)
Description
Here is the detailed technical summary of all dimensions and specifications for your project. You can use this data one-to-one as a technical drawing or documentation for your retraining.
Technical Specifications: Camera Housing Renault Megane 3
The housing is optimized for mounting on the tailgate (handle strip/license plate light).
1. Housing Dimensions (Base)
The base plate forms the foundation for screwing to the vehicle.
- Width: 40 mm (4.0 cm)
- Height: 35 mm (3.5 cm)
- Plate Thickness: 5 mm
- Corner Radius: 4 mm (for a harmonious appearance on the vehicle)
2. Camera Slot (Shaft)
The slot is designed for common square camera modules.
- Inner Dimensions (Width/Height): 23.2 mm x 23.2 mm (for a 2.3 cm camera with minimal mounting clearance)
- Overall Height: approx. 25 mm (measured from the base plate at an angle)
- Slot Wall Thickness: approx. 4 mm
3. Angle and Field of View
The tilt angle is crucial for the correct perspective when parking.
- Tilt Angle: 30° (downwards)
- Effect: At the high mounting position (above the license plate), this allows a view of the vehicle's own bumper edge as well as the area directly behind the vehicle.
4. Holes and Counterbores
All holes are designed so that the screws are countersunk and do not protrude.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)