TILT PHONE STAND - INDUSTRIAL
Print Profile(6)
Description
The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.
- Thanks to the worm gear, it can never happen that the stand with your mobile falls flat.
- Thanks to the combination of a worm gear with bevel gears, the stand enables easy and smooth tilting.
- Compatible with charger.
- It is not necessary to glue the parts here. (Otherwise I made a profile where there are parts with clearance. This version requires the use of glue)
- Smooth design
- Different colors can be used for mechanical parts (Profile: Divided into two plates - Different color).
Assembly instruction:
Instructions can be found in the video below. Please follow the procedure: (video)
https://www.youtube.com/shorts/9PywQ-fwkmk
Groove clearance problem:
If there is too big clearance in the guide groove (02_Gear and 03_Base), it may happen that the 02_Gear tilts too much and the 01_Worm gear will not engage (the stand will not tilt). If this situation occurs, I recommend slightly pushing the left side of the 02_Gear and turning with the 06_Adjustable_Gear.
A VERSION WITH CLEARANCE
- It may happen that main version will not be assembled due to small clearances. Actual clearance depends on many factors (flow, filament, printer condition)
- Parts with the letter C in their name are parts that have increased clearance. These parts must be glued
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (342)