【Initial D - Mount Akina Gutter Run Miniature Scene】1:64 (Multi-part/Assembly/Optional Hand-Painting)

The classic scene from "Initial D" where Takumi drives his personal AE86 through the gutter run on Mount Akina can now be 3D printed by you!

The miniature scene is configured by default to a 1:64 scale, and the width of the gutter can really allow a small car's front wheels to fit in.
Both the AMS print-in-place version (the main body is print-in-place, but the streetlights, guardrails, and warning signs still need to be printed separately) and the fully separated parts version (no AMS required, and print orientation has been finely adjusted to improve surface quality) are uploaded.

All uploaded images are actual photos; the fully separated parts version was printed, and it can be simply colored with acrylic markers to add a sense of depth.

Instructions

1. Material Suggestions:
   1. Shrubbery: PLA Basic Dark Green
   2. Road Surface: PLA Matte Rock Grey or Gunmetal Grey
   3. Guardrails, Streetlights, and Warning Sign Post: PLA Basic Silver
   4. Road Markings: PLA Basic White and Yellow
2. Hand-Painting Suggestions:
   1. Based on my experience, it is not recommended to hand-paint larger parts such as rocks, water bodies, or asphalt roads; only painting details is a more cost-effective solution
   2. Add more green to the shrubbery, differentiating the top tender leaves to enhance the sense of depth
   3. Paint the guardrails, streetlights, and warning signs metallic silver
   4. Colors used in actual photos: Light Green, Metallic Silver
3. Printing Suggestions:
   1. Spiral infill is used by default
   2. To improve printing efficiency, larger parts have a layer height of 0.2mm, and smaller parts have 0.16mm

Other Models

【Seaside Road Miniature Scene】1:64 Scale (Multi-part/Assembly/Optional Hand-Painting)https://makerworld.com/en/models/2209714-hai-bian-gong-lu-wei-suo-chang-jing-1-64bi-li-fen#profileId-2480959