Steyr LP10 Air Pistol Grip

I have now updated my design to have an adjustable palm shelf, fatter grip width and (hopefully) meet the new grip reqirements.  New design can be found here:

https://makerworld.com/en/models/2678615-steyr-lp10-large-grip#profileId-2966145

===================================================================================

I have quite large hands and when I recently bought a secondhand Steyr air pistol I found the grip to be too small so I set to work designing my own based on a scan of the original Steyr grip and lots of measurements of the pistol and my hand.

I had previously made this into a mesh/web hollow grip but once when i invested in a P1S with multicolour opportunities I converted it back to a solid grip and had fun with the colours.  I printed in Sunlu PLA+ black and Bambu Sunflower Yellow PLA with the print oriented upright.  If I printed it again I would use support interface (or PETG) as the intericate pattern on the base did lead to a rough surface I needed to sand smooth.

This is an update of a previous air pistol grip design I published on Thingieverse at this location:

https://www.thingiverse.com/thing:7224228