5th Gen Ram Truck Trashcan (Trim Mounted*)

This is a simple trim mounted trash can designed around the center console of the RAM 1500 5th Gens but it should work with any vehicle with a similar trim opening/slit. This was a remixed model from https://makerworld.com/en/models/125666-trash-can-with-lid#profileId-139158, I added a simple mounting bracket on the back and increased the size to fit flush with my center console (total size is around 11ich in length). The trash can looks simple and like a factory product as it doesn't hinder use of the glove box nor does it take up much leg room for your passenger. I printed in Overture PETG and it took 11hrs but it has to hold up to the Texas heat so PLA wouldn't cut it, make sure to use tree supports for the mounting overhang (don't worry its simple to remove and sand flush if need be) 

Additionally, I used this model for the lid without remix to have a swing lid option: https://makerworld.com/en/models/975041-swing-lid-for-rectangular-trash-can#profileId-950924. Lastly, I used these trash bags to make it look nice and intentional but grocery bags could work as well: https://www.amazon.com/dp/B0F8TTS4GQ?ref=ppx_yo2ov_dt_b_fed_asin_title