SK120 SK120S SK120X SK150 SK150S 120W 150W可调电源外壳
Print Profile(1)
Description
Boost Me (for free)
Original designs are not easy. If this model is useful to you, please consider boosting it for free. Thank you!
Features include:
1. Built-in 150W power supply, supports decoy charging.
2. Supports banana plug power input.
3. Supports USB, Type-C fast charging.
4. Supports quick-connect interface modules like EC5.
5. Supports quick-connect wiring modules.
List of accessories used
| Quantity | Keywords | Reference Model |
| 1. SK120S*1 | 12V Solar Charging Power Generation Board Controller MPPT Auto Boost-Buck Module 120W DC Converter Power Supply | Single Power/120W |
| 2. 150W Power Supply*1 | T12 Soldering Station Switching Power Supply Module 220V to 24V 6A 150W Switching Power Supply Module Bare Board Isolated Power Board | 150W 24V Soldering Station Power Module |
| 3. EC5 Connector*1 | 10AWG High Current Fixable Male EC5E-M Panel Mount Emergency Power Plug Gold-Plated Connector | Blue Fixable EC5 Male + Screws; 1 pc |
| 4. 3518 Fast Charge Module*1 | All-Protocol Mobile Phone Fast Charging Module QC4.0 PD3.0 Flash Charge SCP FCP Fast Charge Main Board Mobile Phone Charging | 3518 Fast Charge Module |
| 5. Power Socket*1 | AC-02A Figure-8 Power Socket Two-in-One with Rocker Switch 4-pin 2-position Red Light Snap-in Fixed 10A 250V | |
| 6. Quick Connect Terminal Block*1 | Two-position Four-way Single Row Speaker Clamp Speaker Wire Clip Terminal Block Connector Audio Wire Clip | 2-position, 44mm*21mm |
| 7. Decoy Module*1 | Decoy Module QC/PD Fast Charge Test Board Adjustable Voltage 5V/9V/12V/15V/20V Dip Switch Adjustment | |
| 8. Buck Module*1 | 5A DC-DC XL4005 Adjustable Buck Module 5~32V High Power 96% High Efficiency Far Exceeds 2596 | |
| 9. Silent 4010 Cooling Fan*1 | Silent 4010 4cm 5V 12V 24V 40*40*10MM 3D Printer North-South Bridge USB Cooling Fan | 12V Oil Bearing 5000 RPM |
| 11. 4MM Banana Jack*2 | Banana Plug Socket 2mm 4mm Test Socket Panel Socket Pure Copper Insulated Terminal Banana Female Hole | 4MM Banana Jack |
| 12. Wires (various) | ||
| 13. Screws (M2.5*12*6) (various) | ||
| 14. Diode*2 | 10SQ045 20A 30A 45V 100V High Current Schottky Diode Solar Photovoltaic Box Anti-Reverse Flow | 10SQ050 10A/50V |
Power Module
Buck Module
Reference Wiring Diagram
Installation Precautions
1. Install half of the screws on the front panel first, then tighten the front panel after all wires are connected.
2. The power module has a base underneath; ensure screws and washers are properly installed.
3. The fan requires washers.
This is the second version configuration
1. Optimized the side cooling vents and added a connecting line to improve print quality during printing.
2. Optimized the buck module installation method, changing it to face upwards.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)