Corner Connectors for 1x2" Lumber, 7 shapes

update 4-12-26 added thru T connector profile by request

Connectors for 1x2" strip lumber (cheap at Hdep)

7 shapes- L&R corners, T junction, coupler, 90,45

Holes are for #6 screws.

I measured 10 of the 1x2's and used average dimensions- these are not tight fitting because all the 1x2's in the pile are slightly different.

If you are building anything that will hold weight or have long wood pieces, I recommend gorilla glue or construction adhesive in addition to the screws.  

I included ½" dowel holes in the corner connections, and 1" dowel holes in other parts, however after printing the dimensions shrink a little, use conduit for dowel.

I will upload PLA profiles first and then add ABS profiles if there is demand.

Check out the different print profiles to print the individual parts

Intended for building light duty cubes, closet stuff, kid's forts, mini greenhouse, grow tent, etc.  Whatever you dream up.. (please send me pics!)

All you need is a cheap hand saw and a screwdriver to build with your 1x2's, (although 1/8" pilot holes are highly recommended to avoid splitting the wood)

Here is a saw guide if you want to cut straight with your hand saw https://makerworld.com/en/models/2062694-magnetic-hand-saw-guide-90-degree#profileId-2227244

here is a link to all my woodworking models

https://makerworld.com/collections/21222666

If these are useful to you please give me a five star rating and a BOOST!