Double-Sided Motorcycle Chain Oiler Attachment

Here is my chain oiler, which is primarily designed for motorcycles with a box-section swingarm. I usually use the Cobrra chain oiler, but it always bothered me that the oil was only applied to one side of the sprocket. This attachment is precisely for that purpose.

for printing:

I designed the model so that a pause is made, and then an M5 nut is inserted.

for mounting:

The attachment is glued under the swingarm and then secured with 2 zip ties. From my experience (already a few thousand kilometers), nothing moves there anymore. The two parts are then connected by an M5x15 hex screw.

for tubing:

Insert the hose coming from the chain oiler into the adapter and also insert two short pieces of hose on the other side (preferably with their natural curvature pointing towards each other, so they press against the sprocket).

for alignment:

I assume that depending on the motorcycle, the installation will vary slightly. On my Honda Hornet, it fit as the parts are now. Should the sprocket distance vary, washers between the parts and a longer screw will be needed to adjust.

I hope this model can help one or two people :-D