Zenitsu Honoikazuchi no kami

This model is a high-detail character study designed for resin (SLA) or fine-nozzle filament (FDM) printing. It features a dynamic low-center-of-gravity pose with integrated environmental effects.

Technical Geometry

• Character Base: A jagged, "cracked earth" circular base. In the STL conversion, this acts as the primary anchor point for the build plate.
• Main Subject: A male swordsman in a wide "laia" (quick-draw) stance. The removal of the haori has created a slimmer silhouette, which reduces the number of complex overhangs near the torso.
• Aura Effect: A stylized dragon-shaped energy trail that wraps from the base up behind the character. This provides structural "backbone" to the print but contains several tapered points that will require delicate support placement. You Can use organic tree supports or other i will have a video to post on this print on my channel-https://www.youtube.com/channel/UC8NIom5lwP8mGa6EMnMD8Rw
• And Dont belive the model and how it says 900g of filiment and 99hrs it is actually
• 4hrs at 150mms and at 0.28mm and will use about 150g of filiment (note this is in one color)