Speaker Wall Mount (V2) - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

nairokard

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 8% infill

Designer

1.7 h

1 plate

4.8(44)

A1 Mini 0.2mm layer, 2 walls, 15% infill

2.4 h

1 plate

4.8(4)

Open in Bambu Studio

Boost

177

547

977

687

Released

Description

This is a simplified version of my articulated speaker mount. This mount is fixed in the X axis but still rotates about the Z axis.

Hardware Required:

1 - ¼ inch x 1 inch bolts

1 - ¼ inch nuts

To mount the speaker, another ¼ inch bolt is needed to attach the arm to the speaker, and I suggest dry wall anchors to ensure this stays on your wall.

Comment & Rating (57)

@yaoi

Boosted

Print Profile

0.2mm layer, 3 walls, 8% infill

very sturdy!

@billrlogan

Print Profile

0.2mm layer, 3 walls, 8% infill

these work great with my clips, surroundsound speakers.

The profile uploader has replied

@nairokard

Oh sweet!!!

@gilbertdarren24

Printed in white PLA. Used M5 bolts to attach mount together and to attach speaker to mount. Speaker is fairly heavy and seems very solid on the mount.

@.s_.

Print Profile

0.2mm layer, 3 walls, 8% infill

petg cf dark blue

@cliffback

Great design, and I'm using this for my rear speakers now. However I wasn't able to angle the speakers enough, so I created a spacer to give a bit more room. Hope it can be of use. https://makerworld.com/en/models/574513#profileId-494800

@Piotrekex

Print Profile

0.2mm layer, 3 walls, 8% infill

top 👍 with PETG

@SleepyBlueCat

Print Profile

0.2mm layer, 3 walls, 8% infill

@Remon80

Print Profile

0.2mm layer, 3 walls, 8% infill

@Saraibaxx

Boosted

Fine, I adjusted it slightly

Show original

@BelastenD

What adjustments were made and why? Best regards

Show original

@Saraibaxx

Boosted

Replying to @BelastenD :

To position the Z906 center speaker

Show original

@bigdog7

Print Profile

0.2mm layer, 3 walls, 8% infill

This model printed ok but supports did not come off clean. The holes got clogged up and need drilling. I will also need to design and print an adapter to fit my speakers.