P2S narrow slim purge poop bin - fits exhaust fan
Print Profile(1)
Bill of Materials
Description
Slim and narrow purge waste bin to fit nicely next to the modified P2S rear exhaust filter. Thanks to the slim design it will not block the venting of the regulator board as well.
This bin is magnetically attached and not sitting on floor to prevent contact and noise. You will need 2pcs of 10x5mm magnets. When inserting magnets, place them as deep in the pockets as possible to prevent magnet sticking to the print head. (this depends on typ of nozzle you use) If you are afraid a tiny drop of hot glue on the bottom of the magnet will secure it safely.
In print profile there are two pauses for inserting the magnet in your print.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)