HyperFeeder B1 (Bird feeder)

HYPERNOVA B1

Description

HYPERNOVA B1 is a modern, clean, and fully 3D printable bird feeder designed in Blender with simplicity and functionality in mind. The design focuses on smooth geometry, easy printing, and reliable outdoor use, making it perfect for gardens, backyards, and balconies.

This feeder allows birds to comfortably access food while helping reduce waste and spillage. Its straightforward structure makes it easy to print, assemble, clean, and refill. The model is designed to be used with included hooks and stands for proper mounting and stability.

FEATURES

• Designed in Blender
• Clean, modern, and functional design
• Beginner-friendly print
• Minimal overhangs
• Easy to clean and refill
• Suitable for outdoor use

ASSEMBLY & INSTALLATION

1. Print all parts, including the feeder body, hooks, and stands.
2. Insert the hooks into the designated mounting holes or slots on the feeder.
3. Attach the stands (where the birds stand on) securely to the base to keep the feeder stable and level.
4. Make sure all parts are fully seated and snug before adding bird feed.
5. Install the feeder by hanging it using the hooks or placing it on a flat surface using the stands.

⚠️ Do not use the feeder without the hooks or stands installed, as this may cause instability or spillage.

RECOMMENDED PRINT SETTINGS

• Material: PETG or ASA (PLA works for short-term outdoor use)
• Layer Height: 0.2 mm
• Infill: 10–20%
• Supports: Not too tough to remove

USE CASE

HYPERNOVA B1 is perfect for bird lovers who want a sleek, customizable, and easy-to-print bird feeder for outdoor environments.

(FEED)BACK

Feedback and suggestions are always welcome! If you print HYPERNOVA B1, feel free to share your results, photos, and any improvements you make. Let me know how it performs outdoors, how different birds interact with it, and if you have ideas for design tweaks, mounting options, or print optimizations. Your input helps improve future versions and makes this design better for everyone.