2019 Porsche 935 "Moby Dick" - 1/24 Scale Model!

Commercial Licensing now available via my Patreon account! Just follow the link in the Bio to get your license today! It's a one-time, non-recurring fee that also includes the rights to all of my photography! Thank you for the continued support! https://www.patreon.com/cw/AEMRavan?utm_source=search&vanity=AEMRavan

2019 Porsche 935 “Moby Dick”  -1/24 Scale model!

If you're a porsche enthusiast (and really any real car guy) you know the deeply routed history of the original Porsche 935/78 race car and it's legendary status. In 2018 Porsche unveiling a heavily modified, limited production (only 77 total cars) 911 GT2 RS outfitted with a body reminiscent of the legendary 935. Here is my tribute to this modern 2019 “Moby Dick” ! 

The model comes in a single color print, separated wheels/tires, spoiler and exhaust (wheels do not spin, display model only). Everything should press together, but some gluing may be required. Be careful removing the supports around the wing, and test fit first to see if it needs glue or not, should be a nice fit, at least it was on mine, but you may need a little  glue. Be very carful with setting the spoiler into the mounting holes and apply light pressure so you don't snap off the vertical supports. 

This is a small spin-off project from my recently added Supra Collection ( https://makerworld.com/en/models/1646284-toyota-supra-turbo-model-car-set-with-mods#profileId-1740049 ). I still have quite a number of cars from my Layered Car models that I've done in the past that I think would look fantastic in a full print!  ( https://makerworld.com/en/collections/6642322-layered-car-art-collection ) 

Drop me a comment and let me know which car model you would like to see made not just layered, but in a full car print! 

Size

This is a 1/24 Scale Model. My previous uploads were slightly smaller so this model was adjust by 127% size to bring it to a true 1/24 scale! Below is a reference image to my previously “standard” size models. (PS: all the models are sized similarly, so if you want to print any of the previous models in 1/24 scale just scale all of the parts equally to 127%)

Assembly

The assembly process is very straightforward with only a couple of things to look out for. The print profile includes a few things: The body of the car (made in one-piece print for a no-seam/glue model), 4 tires (if you care to pay attention to the detail there are 2 left and 2 right tires), and one set of wheels (more to come as I expand the collection)

Start by carefully removing the supports. Most should come off just fine, but at times I found myself using a pick to get to the ones inside of wheel wells. I then recommend using a razor blade (carefully) to remove any support material build-up in the wheel wells and back of model, particularly at the bottom of the rear bumper, top of the license plate cutout, and under the spoiler. 

The most important part is to slightly cut down the wheel spindles area that droops down at the support. This will ensure that you don’t have too hard of a time pushing on the wheels (and risk breaking the wheel and/or spindle). I recommend shaving it down a little, and testing the wheel, and shaving again if needed in a couple of passes. The wheels should be firm to press on, but not feel like you will break the spindle. Due to various filament properties I have settled on wheel cutout size that should work in any filament, but may take a little more shaving for a good, snug fit. 

Once you have shaved the spindle down, press the tires onto the wheels, and install the wheels to the spindles. Make sure to properly align  all wheels in the same orientation. 

Thank you for visiting my page and taking the time to print my models. Your support is truly appreciated. I never expected to have so many people following me and fueling my passion for creating the models that I create!