Fluffy Tails

cover

Patreon.png

Gemini_Generated_Image_fr1ppffr1ppffr1p.png

Gemini_Generated_Image_ix7hp6ix7hp6ix7h.png

Gemini_Generated_Image_gjknmogjknmogjkn.png

IMG_9201.JPG

Gemini_Generated_Image_2ilch32ilch32ilc.png

IMG_9196.JPG

plate_1.png

Keychain hole in ear

plate_2.png

Keychain hole in tail

plate_3.png

Keychain Hole in head

plate_4.png

IMG_9471.JPG

For stronger joints, download this profile.<ul><li>Model size: 120mm</li><li>Material: PLA+ and PLA Matte</li></ul>

Updated with Stronger Joints (Key hole in head, ear, tail)

2c7d72fa7a1a4499.png

0.2mm layer, 2 walls, 15% infill

Keychain

Magnet

IMG_1455.JPG

IMG_1456.JPG

IMG_1457.JPG

The file size of this profile is much smaller and the polygon count is less than 700K but the quality of the final print remains the same. Even PC with less specs can handle this.

Same quality - Smaller File size with lesser polygon counts

单色

3D Prince

checha20260428_010348_(1).png

checha20260428_010348.png

70e51e61-3905-4124-a8e6-483c4ac16113.jpg

a2734f58-f34a-4738-9b8a-63653ad02da0.jpg

Layers Carefully Tuned for Fine Detail &amp; Critical areas Strengthened many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below… several volume modifiers placed in strategic areas to add strength just where it is needed.&nbsp;0.16mm layer, 1 walls, 0.6mm wall width, 0% infill, wall generator arachne, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%.  note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different Bambu printer.&nbsp;&nbsp;0.16mm layer, 1 walls, 0% infill

Layers Carefully Tuned for Fine Detail & Critical Strengthen

Plate 1

FellFreeToPrint

PXL_20260530_095926524.NIGHT.jpg

PXL_20260530_095521542.NIGHT.jpg

PXL_20260530_095447162.NIGHT.jpg

Screenshot 2026-05-30 120718.png

I printed this cute😻 model on my A1 mini.<ul><li>It has 0 supports, and 0% infill → 0 waste</li><li>No AMS needed.</li><li>Print in place.</li></ul>I think, this is the best quality for time rate, with only 54 minutes of printing time.&nbsp;

0.16mm layer, 1 wall, 0% infill, best quality for time rate

Prinlife

微信截图_20260310085724.png

Optimized Detail Parameters Version

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boost me for Free. I will be uploading more such models. 😊</boostcontent></boostme><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002459711/design/39e0fe215c6a19b2.jpg"></figure><h3> </h3><h3>For commercial license &amp; exclusive models visit: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.patreon.com/FluffyTails">https://www.patreon.com/FluffyTails</a></h3>&nbsp;Note: I have updated the model with stronger joints.<ul><li>If the Cat head feels stiff after printing just give it a little shake/nod and it will loosen up.</li></ul>&nbsp;I like fluffy pets, so I thought why not make one and share with others! This cat is highly flexible. Keychain version is also added. Print in place No supports required&nbsp;Do follow since I will be uploading more such models. Check out my other models as well.  Instructions: Material: PLA matte and PLA+Model Size: 120mm Layer height: 0.2 mm Infill density: 15% Supports: None Brim : No Try brims if you have adhesion issues.<figure class="image image_resized" style="width: 45.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002459711/design/884633a3517009ce.png"></figure>&nbsp;If you like this, check out my fluffy tail flexi fox as well: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/models/2426989-fluffy-tail-cute-flexi-fox-with-toy-keychain#profileId-2662049">https://makerworld.com/en/models/2426989-fluffy-tail-cute-flexi-fox-with-toy-keychain#profileId-2662049</a><figure class="image image_resized" style="width: 45.68%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002459711/design/ca4d3cbc5cc90f67.jpg"></figure>

Fluffy Tail Cute Flexi Cat Toy / Keychain

ASIA

Print Profile(6)

Description

For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails

Comment & Rating (1593)

License

Related Models