Drone 60mm Arm Mount (Heavy Lift Drone Components)

Built for extreme loads — these are the custom 3D printed structural components used in our heavy-lift 8-motor MEGA drone.

Designed specifically for carbon tube arm mounting and structural reinforcement, these parts are optimized for strength, durability, and high-temperature performance using PAHT-CF (carbon fiber nylon).

These are the exact components used in our full-scale drone build capable of lifting extreme payloads.

🎥 Full build video: https://youtu.be/2kADVq_LlIE

🔧 Included Files

• 4-Way Center Arm Mount (Main hub)
• Arm Mount Blocks (Corner mounts with logo)
• Angled Leg Mounts (Body connection)
• Angled Feet (Landing gear support)

All files are print-ready (.3MF) and oriented for optimal strength.

🧱 Material Recommendation

Primary: PAHT-CF (recommended)
Alternatives: Nylon-CF, PET-CF, ASA (for non-structural use)

⚠️ Do NOT use PLA for load-bearing applications

⚙️ Print Settings (Recommended)

• Layer Height: 0.2mm
• Walls: 6–8
• Infill: 40–60% (Gyroid or Cubic)
• Nozzle: Hardened steel (required for CF)
• Bed Adhesion: Brim recommended
• Dry filament before printing

💪 Performance Notes

• Designed for high torque + vibration environments
• Tested under heavy lift drone loads (~150+ lbs total system)
• Excellent layer adhesion when printed correctly in PAHT-CF

⚠️ Disclaimer

These parts are designed for experimental and engineering use.
Use at your own risk — always test thoroughly before real-world operation.

🏷️ File Notes (for each file)

Center Body (.3mf)
Main structural hub connecting all 4 arms. High stress component.

Arm Mount Blocks (.3mf)
Clamping-style mounts for carbon tubes. Designed for maximum grip and load distribution.

Leg Mounts (.3mf)
Angled mounts that connect landing gear to main body.

Feet (.3mf)
Landing feet designed for stability and impact absorption.