The Big Blue Hueforge

Voici ma version de l'affiche du film le grand bleu sous hueforge

Project: LeGrandBleu.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 142.86x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #ffffff PLA+ Sunlu White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #10 (0.88mm) swap to Cyan
    At layer #13 (1.12mm) swap to Turquoise

Border Only Colors from here until the end.
    At layer #22 (1.84mm) swap to White for the rest.