Print Profile(1)
Description
Fuel tank cap compatible with Parkside brush cutters and 4-in-1 thermal tools
!!!! WARNING !!!!
1* After printing, carefully check that the cap's ventilation hole is completely clear to allow the tank to breathe. If it is obstructed, use a needle to clear it
2* Although this cap was initially designed for Parkside machines, it is highly likely to be compatible with other generic Chinese machines. Please let me know in the comments if you find it compatible with other machines
3* I recommend using PETG or ABS for printing. PLA is more likely to degrade on contact with gasoline, and the heat from the engine may deform it
4* I used a layer height of 0.12 to achieve good quality threading. However, printing with a higher layer height is possible, but the threading may show defects
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)