T-nut suitable for Record Power Sabre 350
Print Profile(1)
Description
This T-nut is designed as a precisely fitting accessory for guiding the Sabre 350 band saw
The lateral play of the guide can be precisely adjusted via two M4x8 mm set screws
This allows the T-nut to be guided backlash-free in the groove
Adjustment is made directly on the installed part by simply adjusting the two set screws
The T-nut is attached to the component from above using two M6 screws For this purpose, there are corresponding
openings for inserting one M6 nut each
The T-nut also has a wide bolting surface that should be recessed in a groove in the component (e.g. sliding table) (see pictures)
Assembly instructions:
• Two M3 x 8 set screws (grub screws) are required
• Two M6 hex nuts
• After insertion into the groove, play can be eliminated by carefully adjusting the two screws
Dimensions:
Length of the T-nut: 220 mm
Hole spacing of the mounting screws: 170 mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)