Jordan Travers

cover

plate_1.png

player1

coaster.jpg

Instead of a manual filament change, I configured it to use the AMS.

AMS version

lordrocky

IMG_1454_5add40fd-1c05-4294-b5e9-64b886fa1eac.webp

IMG_1455_c72ba2d8-bd9c-4427-96d8-b63744fb05ec.webp

plate_1.webp

Good looking, simple print, great for multi color with no AMS required, just one manual switch.&nbsp;With .2mm layer height, use the pause at layer 13 (already included in profile) for color switch for best result.Pictured as printed with Bambu Matte Charcoal and Basic Bronze.&nbsp;Reminder: When printing with PLA Basic in Gold, Silver, and Bronze, reduce volumetric speed from the standard 21 to 15mm3/s

0.2mm layer, 2 color without AMS

IMG_1455_45d81ae3-8308-4102-8019-458e1a8aef48.webp

Simple print, set for single color printing.&nbsp;For 2-color, use my other profile with pause added, or add a pause at layer 13 for best result.&nbsp;Pictured as printed with Bambu Matte Charcoal and Basic Bronze.Reminder: When printing with PLA Basic in Gold, Silver, and Bronze, reduce volumetric speed from the standard 21 to 15mm3/s

0.2mm layer, Single Color

Greg

IMG_0102.jpg

After a few near misses, I decided to scale only the width of the coaster to a 105 mm and changed the infill to gyroid.Printed with PLA+, and it came out really nice.&nbsp;Multi colour, no AMS needed.&nbsp;<ul><li>0.2mm layer&nbsp;</li><li>2 walls&nbsp;</li><li>15% infill</li></ul>I hope you will enjoyu it :)&nbsp;Printed with A1 Mini

105 mm wide version without AMS

Zelda Coaster

ASIA

Print Profile(4)

Description

Comment & Rating (168)

License

Related Models