Search models, users, collections, and posts
LILYGO T-SIM7080-S3 Case (18650 Battery Version)
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
2 h
1 plate
Open in Bambu Studio
Boost
0
4
0
0
11
3
Released
Description
Content has been automatically translated.
Key Features
- Extra-Large Slots (15mm high): Designed to accommodate any USB-C cable (even those with bulky connectors) and allow for easy insertion of Nano SIM and Micro SD cards without tweezers.
- Optimized Space: 36mm internal height to comfortably fit the 18650 battery under the board and antenna cables above.
- Secure Mounting: Internal standoffs designed for M2 screws with a precise center distance of 105 x 28.4 mm.
- Interlocking Lid with Screws: Solid closure using 4 countersunk M3 screws.
- Antenna Management: Dedicated opening on the short side for routing LTE/GPS antenna cables.
Technical Specifications
- External Dimensions: ~131 x 53 x 36 mm.
- Required Screws:
- 4x M2 (4-6mm) for securing the internal board.
- 4x M3 (10-12mm) for the lid.
- Mounting Hole Distance: 105mm x 28.4mm (Center-to-Center).
Print Settings (Recommended for Anycubic/Bambu/Prusa)
- Material: PLA or PETG (recommended for battery thermal resistance).
- Supports: Required (Tree Supports recommended) only for the side openings.
- Adhesion: If you experience warping at the corners, print with an 8-10mm brim.
- Infill: 20% (Gyroid or Grid).
- Walls: 3 or 4 to ensure maximum strength for the screw posts.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (0)