Mini Boxer - Fidget

This is a small fingertip fidget toy that lets you experience the thrill of boxing without getting tired or needing professional equipment! This model has a short printing time and can be made with PLA or PETG filament

Assembly Instructions:

1. Step 1: Place the base plate face down (with the hook on the left), install the large gear with the handle into the rightmost slot, the small gear into the middle slot, and finally the other large gear into the leftmost slot.
2. Step 2: Place the top cover over the gears, ensuring the sliding hole aligns with the handle. These parts should snap into place.
3. Step 3: Glue one end of the chain to the punching bag and the other end to the hook.
4. Step 4: Slide the boxer figurine onto the gears (ensure the handle is in the middle of the slider when sliding. Otherwise, the figurine will not be able to complete a 180-degree rotation).

Regarding the Use of Glue:

Only the chain needs to be glued to the punching bag and the hook. If the boxer figurine is too loose on the gears, you can add glue. Otherwise, no glue is needed for other parts.