[LC02] 3D Printed 11L Direct Plug-in Graphics Card ITX Small Case
Print Profile(1)
Description
Dimensions and Compatibility:
Case dimensions: 246×268×172mm (excluding feet)
CPU cooler height limit: 135mm
GPU length limit: 247mm
Power supply support: SFX
Case fan support: Rear 9025, Top 12015
Drive bay: 2.5-inch drive bay ×1
Printing Notes:
Due to filament thermal expansion and contraction, dimensions may change after printing It is recommended to first test the shrinkage rate of the filament you are using and adjust the filament shrinkage percentage and the Z-axis scaling of the model in the slicer software
Hardware Accessories:
| Hardware | Specification | Quantity | Notes |
| Smooth Rod | M4*245mm | 4 | |
| Screws | M3*8 flat head screws | 16 | Fixing outer side panels, 2.5-inch drive mounting |
| Screws | M3*10 flat head screws | Several | Structure fixing |
| Screws | M3*5*7 round head screws with washer | 8 | Motherboard mounting, front I/O mounting |
| Screws | Power supply US 6#-32*1/2 cup head screws | 3 | Power supply mounting |
| Copper standoffs | M3*6+5 | 4 | Motherboard support |
| Heat-set inserts | M3*4*5 knurled nuts | Several | Structure fixing |
| Fan screws | 4 sets for 15cm and 30cm fans respectively | 8 | Case fan mounting |
| Magnets | 4×2mm round magnets | 8 | Front panel mounting |
| Front I/O | JHHT2K USB 3.0+Type 3.1+LED switch 25cm | 1 | https://e.tb.cn/h.iauQzSbIbYEXNq5?tk=piDzUJinQUo |
| Power extension cable | JLMake custom 25cm, no rear socket, changed to soldered wire loop | 1 | https://e.tb.cn/h.iau47dSZGSeyweT?tk=RLTRUJi7i1t |
| Power socket | Full copper AC-05E three-pin plug | 1 | https://e.tb.cn/h.iZSBqI0Pq8WKMI1?tk=xfybUJijSg7 |
| Foot pads | Round silicone rubber foot pads, single-sided self-adhesive 20*6*3mm | 4 | https://e.tb.cn/h.iZvzLfb8dl2bvtG?tk=fUdAUJiNf3x |
My Hardware Configuration:
Motherboard: MaxSun eSport B850 ITX WIFI ICE
CPU: 9800X3D
RAM: Kingbank Black Blade RGB DDR5 6800
SSD: Western Digital SN580 2T
Cooler: PCCOOLER RZ620M X
Case Fan: PCCOOLER F5R12015
Graphics Card: MaxSun RTX 5070 iCraft OC12G Ai Jia X2
Power Supply: DeepCool PS750G SFX 750W
3D Printing Filament: Totus ABS-GF White 41100, Totus Wood PLA Classic Birch 13505
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)