Glad it works so well - very cool seeing someone else's print of my design, thanks for posting!

dentalfloss

NH3d

Awesome thanks! I'm glad you like it! Let me know how the tolerances are for you - for mine it fit perfectly but I'd be curious how much variation there is between printers.

everything seems to fit well...the only "issue" I have is the plus being pushed up--depending on the amount of slack in the USB cord. It's not an issue though lol I am happy with it. Do you have yours mounted or sitting on a desk?

ayyyejayjay

Ah interesting! I use a cord with a 90 degree plug at the end so I don't have that issue. I think you can get adapters to angle the plug 90 degrees as well

Printed this over the weekend and the hardware came in today. Love it! 

I'm using the PETG for support interface as it doesn't bond very well to PLA so the supports come away easily. Optional for sure, just makes life a bit easier!

Ah, that makes sense.  I don't have PETG on hand, so I am using only PLA, which for plate 1 (the Streamdeck XL piece) as oriented, makes separation of the supports pretty much impossible on the bottom and mid-section.  Re-orienting and using small tree supports appears to be workable though. Currently printing and if that does work as expected I'll post a profile for it that may help others.

OrionFireBlade

After loading up the model in Bambu Studio, I'm a little confused about the use of both PLA and PETG, with the PETG just being used where the supports are. What am I missing?

Flightsim! Can never have enough buttons!

Are you ishowspeed who needs 48 Buttions!

Brice Thrasher

TehAllFather

0.16mm layer, 2 walls, 15% infill

cover

plate_1.png

plate_2.png

plate_3.png

cf1c800d18f1bccd.jpg

IMG_5044.jpeg

Plate 1: Changed orientation, removed rafting layers, remove small overhangs in supports. On my P2S prints in 11 hours 37 minutes and uses 265 grams of PLA + 4.25 grams of PETG. Plate 2: No changes.  Plate 3: Removed rafting layers, Remove small overhangs on, support type Tree (auto), Style: Tree Slim. Print time 10 hours 19 minutes and uses 262 grams of PLA and 2 grams of PETG.

0.16mm layer, 2 walls, 15% infill - Optimized Layout

Mount both a Stream Deck XL and a Stream Deck Plus together! This works great for flight simulation but would be useful for anyone needing to use two Stream Decks at once. Also includes a slot in the front (61mmx71mmx6mm) for use with a desk clamp, for example a HOTAS mount.&nbsp;For assembly use M3x6mm heatset inserts and M3 screws with countersunk heads.

Print Profile(2)

Description

Comment & Rating (14)

License

Related Models

Dual Stream Deck Plus and Stream Deck XL Mount

Print Profile(2)

Description

Comment & Rating (14)

License

Related Models