YoRHa No.2 Type B From Nier: Automata Full Body 3D

With Colors :

Technical Specifications

• Total Print Time: 1 Day, 13 Hours, 47 Minutes
• Filament Changes: 1,436
• Total Filament Weight: 321.46g
  • Model Weight: 14.07g
  • Purged/Tower Weight: 297.89g
• Estimated Cost: ~$8.03 (based on standard filament pricing)

Printing Recommendations

• Purge Settings: To save filament, I highly recommend enabling "Flush into objects' infill" or "Flush into support" if you are adding more items to the build plate.
• Prime Tower: A prime tower is essential for this many swaps to ensure clean color transitions and nozzle pressure.
• Adhesion: Given the 37+ hour print time, ensure your build plate is clean. A brim is recommended for the figure if it has a small footprint.

• Filament: Designed for 9 colors. If you have a single AMS, you will need to plan your manual swaps or consolidate similar colors to fit 4 slots.

  Without Colors:

• Category	Details
  Total Print Time	1h 50m
  Actual Printing Time	1h 29m
  Total Filament Used	19.50 g (approx. 6.43 m)
  Material Split	Model: 9.90 g / Supports: 9.60 g
  Filament Changes	1
  Estimated Cost	$0.49

   

• Printing Tips
• Supports: This print uses roughly the same amount of material for supports as it does for the model itself (9.60 g). Ensure your support interface settings are tuned for easy removal to keep the model surface clean.
• Preparation: Note that there is a 20-minute lead time included for printer preparation and timelapse setup.

• Settings: The slice includes Seams visibility—make sure to check the preview to ensure seam placement doesn't interfere with the model's aesthetic details.