Stabilizer Brackets for Bambu Lab A1

Bambu Lab A1 Side Stabilizers / Fixadores Laterais

These are my first 3D printed designs! Pair of custom side brackets to keep your Bambu Lab A1 firmly in place and prevent it from "walking" or shifting during high-speed prints

Features:

• Left and right versions included in one model (or separate files)
• Right side has cutout for the LCD screen and opening for the LED light — no interference!
• Designed to fit snugly on the printer edges
• Printed and tested in PETG for durability and slight flexibility
• Easy to print — no supports needed (in most orientations)
• Use strong double-sided tape, 3M VHB, or screws (if you prefer) to fix them to the table

Why this helps: The A1 is fast and can vibrate/move on smooth desks. These anchors make it much more stable without modifying the printer

Print recommendations:

• Material: PETG (recommended) or PLA/ABS
• Infill: 20-30%
• Layer height: 0.2 mm
• Walls: 3-4
• Top/Bottom: 4-5 layers

Files included:

• Left_side_stabilizer.stl / .3mf
• Right_side_stabilizer.stl / .3mf
• (Optional: combined file or print profile)

If you make one, I'd love to see your makes and photos! Feedback welcome — this is my first upload :)

Portuguese (add below or as a separate section):

Side Stabilizers for Bambu Lab A1

This is my first published 3D work! These are two supports (left and right) to fix the A1 to the table and prevent it from moving during prints (especially at high speeds)

Highlights:

• Right version with cutout to not touch the LCD screen and opening for the printer's LED light
• Firm fit on the sides of the A1
• Printed in PETG — resistant and with slight flexibility
• Easy to print, no supports in most orientations
• Fix to the table with strong double-sided tape, VHB, or screws

It helps a lot if your table vibrates or if the printer "walks" a bit

Print recommendations:

• Material: PETG (best option) or PLA/ABS
• Infill: 20-30%
• Layer height: 0.2 mm
• Walls: 3-4
• Top/Bottom: 4-5 layers

Files:

• Left side
• Right side
• (May include .3mf with a ready-made print profile in Bambu Studio)

If you print it, please post photos in the makes! Any suggestions are welcome :)