70mai A800SE Dashcam Mount (Replacement / Spare)
Print Profile(1)
Description
Boost Me (for free)
Boost me for free. Your support helps me create more Project like this
Description (EN)
If your original 70mai A800SE mount is broken, or you want a second mount to move the dashcam between two cars, you can print this replacement bracket and keep a spare ready.
Material recommendation: print in PETG to better handle the heat inside a parked car during summer, since PETG generally has better heat resistance than PLA and car interiors can get much hotter than the outside temperature.
Mount it using a strong double‑sided tape solution (use the same type you already trust for car accessories). If you need variants or tweaks, leave a comment and I’ll try to help.
Description (EN)
If your original 70mai A800SE mount is broken, or you want a second mount to move the dashcam between two cars, you can print a replacement mount / second mount and keep a spare ready.
Material recommendation: print in PETG (recommended over PLA) to better handle the heat inside a parked car during summer. PETG generally has better heat resistance than PLA (higher softening temperature), making it more suitable for car accessories exposed to summer heat.
For mounting, you can use a strong double-sided tape solution for car accessories (the same type you already trust). If you need variants or tweaks, leave a comment and I'll try to help.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)