The Moss Clock – Nature-Infused Wall Decor

NatureTime: The 3D-Printed Moss Clock

Bring a touch of organic modernism to your home! This clock combines clean geometric lines with the natural texture of reindeer moss. The deep pockets are specifically engineered to hold moss securely, creating a stunning 3D depth effect.

🛠️ Technical Specifications (Read Carefully!)

To ensure your clock works perfectly, please follow these print settings:

• Print Profile: Use the provided .3mf file. It contains all necessary modifiers.
• Hands (Branch Style): MUST be printed with 100% infill. This is crucial for proper weight distribution and balance so the mechanism can rotate them.
• Nut Cover (Overlay): Must be printed at 0.12mm layer height for a precise fit.
• Supports: Required ONLY for the hanging tab (mounting loop) on the main body. The rest of the model is supportless.
• Mechanism: This design requires a High Torque (High Moment) Clock Movement. Standard motors may be too weak.
  • Recommended Part: Aliexpress High Torque Mechanism

🧩 Assembly & Installation

1. The Nut: Install the metal nut into the 3D-printed cover using a soldering iron (heat-set method). Gently press it into the plastic for a permanent bond.
2. The Moss: You will need approx. 150g - 200g of preserved reindeer moss. Secure it using hot glue or wood glue (PVA).
3. Wall Mounting: For the numbers/digits, it is best to use double-sided foam tape or a small amount of mounting adhesive for a clean look on your wall.
4. The diameter of the entire clock is at least 85cm

Preserved moss (Reindeer moss) doesn't require watering or sunlight. It stays soft and green by absorbing humidity from the air. Perfect for low-light rooms!

⚠️ HIGHLY RECOMMENDED: Easy Mounting Template! ⚠️

Planning to print this clock? Make the installation process a breeze! I have designed a dedicated, fully adjustable rotary mounting template specifically for this model.

Forget about tedious measuring or crooked numbers on your wall. This smart jig allows you to perfectly align and space out the hours with an adjustable radius ranging from 30 cm to 45 cm.

👉 Get the Mounting Template Here: [ https://makerworld.com/en/models/2574827-rotary-mounting-template-perfect-wall-clock#profileId-2839143 ]

If you like this design, please leave a ⭐⭐⭐⭐⭐ review and share a photo of your finished clock! I'd love to see what colors of moss and filament you chose.