Hula TPU Build Spacers - 30mm & 50mm

I really like the build plate system from @RdyPlay3erOne, but I needed extra-large Hula spacers to support not just one — but two build plates on my H2D. https://makerworld.com/en/models/1480769-h2d-hula-plate-holder-5-plates#profileId-1546114

So I modified the excellent Hula Spacer model from @Oshea by increasing the Z height to 30mm and 50mm to accommodate the additional plate height. https://makerworld.com/en/models/973324-spacer-for-hula-anti-vibration-feet?from=search#profileId-945542

I printed these in TPU 95A (Sunlu), and with this setup you no longer need the bottom TPU insert that comes with the standard Hula adapters.

A quick note: this isn’t necessarily “set it and forget it” unless you’re very confident in your TPU tuning. I’m newer to TPU and had to adjust temperatures and settings quite a bit to get everything dialed in properly.

If you need a different height, simply scale the model in the Z axis to match your setup.

When preparing the plate, I recommend:

* Deleting the spacer height model you don’t plan to use
* Cloning the version you do want so you can print the correct quantity

This worked perfectly for my setup — hopefully it helps someone else running multiple build plates or drawers under their H2D.