SRM Carrier for Battletech

This model is based off of the CGL sculpt. It was designed for the 0.2 nozzle but should be printable with a 0.4 as well.

PARTS:

This model comes in 4 main parts, and a hex base.

Print Recommendations:

The main SRM turret is laid facedown directly on the build plate. Because of this it ends up with a rough texture. This of course could be sanded off, or if you have it, you might consider using the smooth build plate. I have only printed this model with the regular textured plate.

Assembly:

Note: you don't need glue for the tank treads (they snap fit rather well), but it is recommended to do so.

Turrets are interchangable. If you already printed my LRM Carrier, you can print just the SRM turret to convert it.

1:  Glue the tank treads to the main hull of the vehicle.

2: Glue the turret to the top of the vehicle in its desired position.