Print Profile(1)
Description
When using the car vacuum cleaner, the air outlet always blows towards my face, which is quite annoying. So, I designed an elbow air guide tube to direct the air from the outlet to the side, preventing it from blowing on my face.
1. I have the Aituteng 25-year standard edition.
2. The inner diameter of the air duct is 52.4mm.
3. The tightness of my direct print was just right; it can rotate and won't fall off during use. If the tightness of your print is not suitable, you can slightly adjust the scaling.
4. There is a 10mm high verification ring in the print profile. You can print the verification ring first to check if the size is suitable, and if it is, then print the main body of the air guide tube.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)