Cover Samsung S26 Ultra – TPU + PLA - Free 3D Print Model

Search models, users, collections, and posts

Zibibbo

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

X1E

H2D

H2C

H2D Pro

X1 Carbon

H2S

A1 mini

P1P

P2S

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

2.1 h

2 plates

4.9(16)

0.16mm layer, 2 walls, 15% infill

Designer

2.1 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

104

282

518

338

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

Do you like the design? A Boost 🚀 or a Like would mean the world to me and encourage me to create new projects!

Boost Me (for free)

Do you like the design? A Boost 🚀 or a Like would mean the world to me and encourage me to create new designs!

⚠️ An updated version is available! The v2 introduces optimized tolerances based on community feedback and a new interlocking PLA button system for improved haptic feedback and aesthetics. You can find the link to v2 in the profile description / remixes section.

🛡️ Ultimate Hybrid Protection for Samsung S26 Ultra

Protect your Samsung S26 Ultra with this high-performance hybrid case, designed to offer superior protection without sacrificing style, comfort, and ergonomics.

The design combines the flexibility of TPU, ideal for shock absorption, with the solidity of a rigid PLA backplate, creating a durable, balanced, and pleasant-to-hold structure.

✨ Main Features

Visible Colorful Decorative Detail
The backplate features a precise cutout that reveals the underlying TPU, creating an elegant colorful detail that adds depth and character to the cover.
Advanced Hybrid Design
Flexible TPU body for easy installation and excellent impact protection, combined with a rigid PLA insert for increased structural integrity.
Fully Protected Buttons
The power and volume buttons are completely covered by TPU, ensuring total protection without sacrificing responsiveness, with a pleasant "click" feedback.
Camera Module Protection
Raised edges specifically designed to protect the large and advanced camera module of the Samsung S26 Ultra from scratches and direct impacts.
Premium Texture
The backplate is designed to be printed face down on a Textured PEI Plate, achieving a professional, non-slip, and fingerprint-resistant finish.

⚙️ Print Settings

1. Main Body (Bumper)

Material: TPU (95A recommended)
Walls / Perimeters: 3 walls for increased durability
Infill: 15–20% (Gyroid or Grid)
Supports:
- Optional: Minimal supports for the port area
- Or: None

2. Backplate (Insert)

Material: PLA, PLA-CF or PETG

Comment & Rating (43)

@user_1460822191

The print looks really nice! I have not tested it on the phone yet. Used TPU for AMS and it is perfect for a case. Still soft but harder than 95a. I did layer height 0.08 to get best quality possible.

The designer has replied

@user_1460822191

it does not fit. the holes for the pen and the speaker at the bottom is on the wrong side of the case.

@zibibbo

Replying to @user_1460822191 :

I'm so sorry for the error! I will correct it and upload it again by tonight, can you confirm if the measurements are correct, and if so I will also make other adjustments

Show original

@Jdaniel328

Replying to @zibibbo :

hello @zibibbo can you tell me which is the final version or at least pass the link. Thank you very much

Show original

@mcclane1825

Boosted

Sorry, the hole position is incorrect, it's reversed left and right

The designer has replied

Show original

@zibibbo

hello, the model should have been updated a couple of days ago to fix this error

Show original

@mcclane1825

Boosted

Replying to @zibibbo :

Thanks so much

@X1C2NOUS

Replying to @mcclane1825 :

Are the dimensions correct?

Show original

@eier1188

I think this model should be deleted, as it's outdated, and the model is flipped, The Samsung text will be backwards, and the camera cutout is on the wrong side.

(Edited)

The designer has replied

@zibibbo

Hello, I have corrected the fact that it was flipped (I must have turned it over by mistake in one of the last updates). I am leaving this version because perhaps someone prefers TPU buttons over the PLA ones from the new version

Show original

@tomerstern

Nice print. I will post another comment when I get my phone in the next few days.

@tomerstern

And here it is covering the phone. Perfect fit.

@user_120903006

Print Profile

0.16mm layer, 2 walls, 15% infill

printed really well, and the early issues have been fixed. it's a little tight on the last corner, so it doesn't sit quite right on the last corner and the edging on the top. not sure if there was shrinkage in the TPU or if it just needs like .5mm more space. but otherwise its a quick print, and has got me out of a jam waiting for the new case in the mail.

@WhatThe

Doesn't fit at all!

The designer has replied

@zibibbo

Hello can you provide me with more details and also some photos if possible so I can fix the model thank you very much

Show original

@WhatThe

Replying to @zibibbo :

The case was slightly too small.

@zibibbo

Replying to @WhatThe :

@WhatDidIPrint? This might be due to slight TPU shrinkage. Each brand has slightly different characteristics, so I would recommend scaling the model slightly. 0.5% should be enough if you're saying the phone is a tight fit (be careful not to scale the Z-axis, otherwise the phone might be loose once inserted)

@shroombles

this case DOES fit however my charger does not. It also fits a little loose so it’s easy for the edge of the phone to just slip out every now and again.

The designer has replied

@zibibbo

"Hi, I'm sorry you had some issues. If you can send me a few photos of the charging port, I can try to resize it correctly. Regarding the fit, I've received a lot of mixed feedback—some said it was too tight, while others said the opposite. I think it’s more an issue of shrinkage with the various TPUs used. Regardless, I will publish a profile with tighter tolerances.

@shroombles

Replying to @zibibbo :

hello, turns out it was just the size of my charger. All my other chargers fit fine! the case has been doing its job so far 👌

@IcyKing

Hi. Would it be possible to put a quadlock/mag ring onto it ? That would be amazing. Love the design.

The designer has replied

@zibibbo

Hello, a print profile is available that features a recess to install a magsafe ring and make the cover compatible with all magnetic accessories I hope I was helpful, feel free to ask me if you have any other questions

Show original

@BreakfastwithBe

will this work with just pla?

The designer has replied

@zibibbo

hi, with just PLA it will probabily brake, you can add cuts in the sides to reduce tension but i havent tried it yet

@aygheith

thanks for this! unfortunately the spen is on the wrong side

The designer has replied

@zibibbo

hello I apologize for the mistake I updated the model with the holes on the correct side

Show original

License

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.