Eagle Claw Orchid PRO-1200C fixed-wing FPV carrier model aircraft

The 鹰爪兰PRO-1200 is a new aircraft based on the 鹰爪兰-S880 design, featuring a larger size with a wingspan of 1200mm, added flaps, making landing speed more controllable, and overall higher playability.

Basic Specifications

Wingspan 1200mm, fuselage length 1000mm, features ailerons, flaps, rudder, and elevator, totaling 6 movable control surfaces. Wingtips have 3 different options for free selection. Designed with an FPV platform canopy, allowing for free installation of equipment as needed. Multiple fuselage components have open STEP files for free editing.

Designed with 2 battery compartments, both 4S1P21700 and 6S1P21700 batteries can be used for balancing.

Printed using Bing ABS-ASA filament, 1 wall print, areas needing reinforcement have been strengthened using modifiers. Empty aircraft print weight 760g

Flight Test Data Reference

Sunnysky 2212-1250kv twin motors, 7045 two-blade propeller, 6s1p21700 battery, takeoff weight 1800g, cruising current 5A, speed 50KM/H. With flaps fully open during landing, landing speed can be controlled at 40KM/H. For landing, please refer to my landing GIF.

For assembly, please refer to the manual

Disclaimer: The print files are for sharing and communication purposes only, commercial use is prohibited. All enthusiasts are requested to comply with laws and regulations. For any accidents or crashes caused by using this model, the user shall bear all responsibility, and I will not be held liable. By printing and using this model, you are deemed to agree to this statement, thank you!