Formula Vintage with Headlights / Hazard lights
Print Profile(2)
Bill of Materials
Description
I would like to thank Kocyns for the Formula Vintage – CyberBrick design. It’s a clean and sleek design.
https://makerworld.com/en/models/1828517-formula-vintage-cyberbrick#profileId-1952287
The only thing missing was headlights and hazard (warning) lights. I have created a additional design that complements the great original design. It is great to drive the car in the dark!
In addition to the white headlights, I also programmed orange hazard lights for the front and rear. You can easily toggle between the modes by pushing the pushbutton on the left side of the remote.
You will need an additional 1 set of 2 pcs WS2812 RGB LED’s and a WS2812 LED HUB, which can be purchased separately:
WS2812 LED Hub with 3-Pin SH1.0 Connector (1 pc)
WS2812 RGB LED with IDC0.8 4-Pin (2 pcs)
The headlights do not need to be glued on, and can be easily clipped into place.
Please read the Assembly Guide for easy implementation.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)