Pokemon - Chibi Mega Starmie
Print Profile(1)
Description
This chibi model of mega starmie comes in at a height of 7cm, and is designed to be printed without the need for an AMS!
The cover photo was printed using Bambu PLA matte lilac, Bambu PLA matte lemon yellow, and Bambu PLA red.
This model will need a small amount of super glue to hold it all together. I recommend dry fitting the 4 purple parts to see how they fit together before gluing them, as it's easy to get the orientation mixed up.
If you're not using the included print profile, I recommend printing this model at a layer height of 0.1mm. The entire model can be printed without support, however the red gem may need a brim for best adhesion as it's somewhat small.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)