Under Falling Skies MotherShipTray/Under Falling Skies Mothership Tray

[Under Falling Skies] Alien Mothership Tray

[Under Falling Skies] Alien Mothership Tray

[Model Description]
This is an alien mothership-themed storage tray designed for the solo board game "Under Falling Skies". It is designed to be used during gameplay instead of the mothership panel, allowing returning fighters to be placed in the tray.

I previously used decorative mothership models that were publicly available, but there was no space to place fighters returning to the mothership during gameplay, which made the game messy.

So, I designed it myself from scratch, considering how to improve those inconvenient aspects.

If you are currently using an organizer that has enough space to accommodate existing 3D mothership models, it will likely fit.

This is an alien mothership-themed storage tray specifically designed for the solo board game "Under Falling Skies."

Designed to be used in place of the original mothership tile during gameplay, this tray provides a dedicated space to hold and organize returning fighters.

I previously used various decorative 3D mothership models available online, but I found that they often lacked space for the returning fighters, which made the game area cluttered and disorganized. To solve this practical issue, I designed this model from scratch, focusing on both theme and functionality.

If you are already using a board game organizer with enough clearance to accommodate standard 3D mothership upgrades, this tray should fit comfortably within your existing storage solution.

[Recommended Print Settings]

For PLA (Black or Dark Grey recommended), it is recommended to use a bright or vivid color for the bottom 0.5 to 0.8mm as an accent, and print everything above that in a dark color.

Supports: Due to the detail, multiple supports will be generated at the bottom rear. Please remove them after printing 
 

• Material: PLA (Black or Dark Grey recommended).
• Color Tip: I highly recommend using a bright accent color for the base (from 0.5mm to 0.8mm) and switching to a dark color for the rest of the print to create a glowing engine effect.
• Supports: Due to the intricate exterior details, multiple supports will be generated at the bottom rear area. Please remove them carefully after printing.