X2D/P2S Active Carbon Air Filter
Print Profile(1)
Description
Boost Me (for free)
The model is a refillable air filter as a replacement for the original internal air filter of the Bambu Lab P2S and X2D.
There is also an alternative model of the filter with an additional HEPA filter stage that you can find here.
Any commercially available activated carbon pellets can be used. The only requirement is that it must be acid‑free.
With the filter, VOCs generated during printing are captured.
Optionally, a filter fleece up to 3 mm thick can be used to keep fine activated‑carbon particles from escaping the filter. This isn’t strictly necessary but it is recommended to avoid contamination with carbon dust. The less finer the particles in your activated carbon are, the less critical the filter fleece becomes.
Print and Assembly Instructions:
It is recommended to use PETG or ABS/ASA for this filter.
- First print all two parts
- Add the active carbon
- Add the (recommended, but optional) filter fleece
- Close the filter with the lid
- Replace the stock filter with the new one
Sourcing of the Parts:
Example Links for activated Carbon Pellets:
- Meltbro (Nevermore Active Carbon, this is what I am using)
- Amazon (alternative if you want to source from amazon, but quality of Nevermore Carbon is best)
Example Link for filter fleece
- Amazon (this is what I am using)
Other models:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)