P2S Side Door Seal V2

This is a side door seal for the Bambu labs P2S. I have been printing more with ABS and ASA and was trying to keep the temperatures in the chamber warmer and keep the smell in. I have achieved a consistent 58C chamber temperature and have even seen a maximum of 63C.

This Is V2: in version 2 the area between the door in printer is now 0.25mm tighter and can now be printed with any material.

I recommend printing this in PETG but it will work with all other materials except for PLA because of its low heat resistance

To install:

• Remove the thin original door seal, this takes some light effort as its taped on
• Place 1mm thick double sided tape on the channels of the seal 
• press into place for about a minute

Please let me know if you liked my model or if you have anything you want to see improved on it. 

Cheers