Varang's Buugeng - Avatar inspired prop
Print Profile(1)
Description
Here's a model Varang's Buugeng:
Size from tip to tip is 80cm, but you can scale to preference as the inner supports are also 3d printed, just make sure you keep the same scale for everything.
The internal supports add stiffness to the prop (should not break in half if it falls), and also help you with the alignment of the sections.
For the assembly, you're going to need superglue!
---------------------------------------------------------
Remember to
Boost Me (for free)
If you like this model! :)
---------------------------------------------------------------
Here's the assembly guide:
When assembling, add superglue of all 4 sides of S1,S2,S3 parts.
Assembling pieces 3-5 can be a little tricky as the support is curved, wiggle the parts a little bit to make them slide in better!
And repeat on the other side!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)