Hueforge Sae Itoshi (BlueLock) honeycomb mode
Print Profile(1)
Description
✨ IF YOU LIKE MY MODELS FOLLOW AND SHARE ✨
Project: sae.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 0.8
PLA SmartMaterials Dark Blue Transmission Distance: 1.2
PLA SmartMaterials Red Transmission Distance: 5.1
PLA SmartMaterials Pink Transmission Distance: 6.2
PLA Anycubic White Transmission Distance: 8
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Dark Blue
At layer #10 (0.96mm) swap to Red
At layer #15 (1.36mm) swap to Pink
At layer #20 (1.76mm) swap to White for the rest.
Nota: para su perfecta alineación con otras imágenes en modo panal descargar la guía
https://makerworld.com/es/models/1361112-honeycomb-mode-guide-for-hueforge#profileId-1405828
Boost Me (for free)
No olvides darle a "Me gusta" y guardarlo para que puedas encontrarlo fácilmente más tarde!
Boost Me (for free)
Don't forget to hit like and save it so you can find it easily later!
Every boost helps me keep creating new designs I really appreciate your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)